- Agricultural Machines
- Asian Wire Machines
- Braille Appliances
- Construction Machines
- Dairy Machines
- Educational Material Charts & Models
- Food Processing Machines
- Garage Equipments
- Jwellery Making Machines
- Kitchen Equipments
- Laboratory Equipments
- Musical Instruments
- Paper Converting Machines
- Physiotherapy Instruments
- Pouch Packing Machines
- Rice Mill Machinery
- Scientific & Educational Equipments
- Sheet Metal Machinery
- Small Scale Machines
- Workshop Machines
JWELLERY MAKING MACHINES
3" MINI ROLLING MILL, Cat No. : JM-06
This is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base.
3" Motorised Design Rolling Mill, Cat No. : JM-09
This is a 3" roll length rolling mill designed with provision to change the rolls easily and quickly. This makes it ideal for use in design rolling work where you may want to use more than one design roll frequently. The machine is fitted with gear box and the main roll housing frame is made from solid steel for long trouble free life. Its supplied with 1.0 HP 220 volts single phase AC electric motor and conveniently located R/F switch for both forward and reverse operation.
4" Bench Combined Rolling Mill, Cat No. : JM-07
This bench model rolling mill is provided with lever system so that either sheet rolls or the wire rolls can be used at any one time with provision to fit side rolls. This machine is also available with a specially designed steel fabricated stand with 1.0 HP 220 volts single phase Cast Iron body TEFC AC electric motor, R/F switch and V belt. The R/F switch is provided complete with wiring to allow both reverse and forward operation.
5" Bench Single Roll Rolling Mill, Cat No. : JM-08
This is a bench rolling mill with roll size of 5" x 2.1/2" and is available in three models. It is available with either the sheet rolls, or wire rolls or can be supplied with combined sheet and wire grooves in one single roll. Similar rolling mill is also available with roll size of 4" x 2.1/4" and 6" x 3" in the three different versions as for the 5" size rolling mill. Specially designed 6" x 3" roll size bench rolling mill is also available with higher roll opening for thicker sheet work.
5" Floor Model Combined Rolling Mill, Cat No. : JM-011
This is a 5 inch roll length combined sheet & wire rolling mill. The rolls are made of high chromium special steel, hardened and ground finished. They are housed in extremely strong frame to overcome all the vibrations and stresses developed during working. The rolls are running in special anti friction phosphor bronze alloy. The gears are made of case hardened steel and immersed in oil for noiseless and smooth operation. Various components are standardised and are interchangeable. This assures easy maintenance.
5" Motorised Single Roll Rolling Mill, Cat No. : JM-010
This is a 5" roll length combined sheet and wire rolling mill with provision to mount side grooving rolls. The rollers are housed in strong solid steel housing. The machine is fitted with oil gear box system and supplied with heavy duty 1.0 HP 220 volts single phase AC electric motor and R/F switch for both forward and reverse operation.
6" Bench Double Geared Rolling Mill, Cat No. : JM-012
This is a 6" x 3" roll size bench rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears instead of only ONE as in other Bench model rolling mills.
ANCHOR CHAIN MACHINE, Cat No. : JM-026
Anchor chain jewellery is a highly specialised form of jewellery making in which precision controlled production and seamless finishes are essential for an ideal product. With our high performance anchor chain manufacturing machinery, we provide our clients to manufacture Anchor chain jewellery in diverse sizes & styles as per their requirements and be assured of great finishes everytime.Technical Specification :
Automatic machine for curve cable, double curve chain with wire from 0.25 mm to 1.00 mm in above mode.
BALL CHAIN MAKING MACHINE, Cat No. : JM-025
Handles large scale production of high quality balls chains. Our high performance range of Ball Chain manufacturing machines have the capability to handle balls of varying sizes of diverse materials. Ensuring precision and accuracy, these machines ensure high levels of performance in every aspect of production.Technical Specification :
Suitable for the production of ball or other shapes in small dimensions by simply changing Dies. From 0.80 mm to 3.00 mm in the above mode.
BENCH MELTING FURNACE, Cat No. : JM-021
This is an excellent reliable portable melting furnace. It operates on 220 volts single phase supply. However the heater element receives only D.C. current and so it is TOTALLY SHOCKPROOF. It is supplied complete with digital electronic temperature controller with thumb wheel switches for precise setting of desired temperature. It is available in three models with 1/2 kg, 1.0 kg and 2.0 kg gold melting capacity. Floor Model melting furnace in two models with 2.0 kg and 5.0 kg. Gold melting capacities is also available.
Bench model King Faceting, Cat No. : JM-05
This is the latest model of combined horizontal and vertical head Diamond cut facetting machine. It is simple in construction and operation. The machine center remains unchanged when switching between the two cutting heads. This machine too is supplied complete with all standard accessories as listed under Universal Facetting model.
Bench Model Simple Facetting, Cat No. : JM-01
This is a simple horizontal head bench model diamond cut faceting machine. It is a versatile easy to use machine and with the use of basic slides, it is possible to design a large variety of items. Its time tested divider assembly is very simple and easy to operate and also allows manual operation for hand dulling of bangles. The vertical head can be fitted in place of horizontal head easily and quickly.
BENCH MODEL SWISS TYPE FACETING MACHINE, Cat No. : JM-03
This is a horizontal head swiss type bench model facetting machine. Its swiss type divider design makes the machine operation really easy and simple. Provision is made so that vertical head can be fitted easily in place of the horizontal head. The machine is light weight and occupies little floor space.Standard accessories supplied with the machine: a. One pc 1/6 HP single phase AC electric motor with control panel. b. Microscopic attachment with microscope c. 18 pc NYLON bangle collets and 20 pcs Brass Ring collets d. 5 pcs Pendant collet and 4 pcs Tops collet e. Flat Pendant attachment. f. Pipe Chain and Damru attachment. g. Electric push button brake for horizontal head h. 2 pcs Diamond Tools & 2 pcs Carbide Tools
Extra accessory available includes specially designed vertical head with tool lifting arrangement with separate motor, chain cutting attachment, six tool holder etc.
BOX CHAIN MAKING MACHINE, Cat No. : JM-015
This is Box Chain Making Machine supplied complete with all standard toolings and accessories available in various models suitable to make various sizes box gold chains complete with suitable 0.25 HP electricals.
Chain Hammering Machine, Cat No. : JM-014
Motorized model heavy duty Chain Hammering Machine to be supplied complete with suitable electricals with controls. The approximate weight of this machine is 700 kgs.
Chain Clipping Machine, Cat No. : JM-017
Chain clipping machine use for clipping any gold chains. The machine is supplied complete with all standard accessories and suitable electricals.
Chain Soldering Machine, Cat No. : JM-013
This is a motorized chain soldering machine using gas for heating with variable speed drive.
COMPACT CHAIN MAKING MACHINE, Cat No. : JM-016
This is Compect Chain making machine supplied complete with all standard tooling and accessories complete with suitable electricals.
FLOOR MODEL SWISS TYPE FACETING, Cat No. : JM-04
This is a combined horizontal and vertical head facetting machine with divider assembly mounted on strong base moving on main shaft with ball bearing for easy movement and machine supplied with stand with drawer and tool chest.Standard accessories supplied with the machine: a. Two pcs 1/6 HP single phase AC elec. motor with control panel. b. Microscopic attachment with microscope. c. 18 pcs NYLON Bangle collets and 20 pcs Brass Ring collets. d. 5 pcs Pendant collet and 4 pcs Tops collet. e. Flat Pendant attachment. f. Pipe Chain and Damru attachment. g. Electric push button brake for horizontal head. h. 2 pcs Diamond tools & 2 pcs Carbide Tools.
Extra accessory available include automatic motorised self lining attachment with separate motor and speed regulator, electromagnetic INSTANT STOP to horizontal head, chain cutting attachment, six tool holder etc
GEM STONE CUTTING MACHINE, Cat No. :
Gem Stone Machine (Semi Automatic) These Machines are used for cutting gemstone. Calibration and shapping of cut stones and cabochons of any size and shape. Diamonds straight wheel moves in horizontal position while in rotation to high production and to save diamond wheel. Dial facility for measuring stones calibration. Arrangement for stone's height adjustment. D.C. variable speed motors and control. Water tank with pump for cooling the diamond wheel. Calibration accuracy 0.02 mm. Electrical 1/4 HP Motor 1440 RPM 230 Volt AC Water Pump 1/20 H.P. DC Rectifier 12 Volts 15 AMP - DC drive motor with variable speed control Two Diamond wheel size bore 1/2'' width 3/4'' x dia 6'' - Length 26'' Side to Side Width 24'' 24'' Hight 45'' Overall
Hand Operated Stamping Press, Cat No. : JM-018
This is an excellent quality superior design hand operated double action adjustable force type jewellery stamping press. It is ideal for marking rings, necklaces etc with purity markings such as 14 K or 18 K and is also suitable to mark small company logo or initials. The press is equipped with adjustable force feature with a lock to have best repeat impressions each time.
HAND PRESS FOR JWELLERS, Cat No. : JM-019
These jewellers' hand presses are available in six sizes. These are solid body heavy presses with 25 mm one inch hole in ram. The presses are supplied with wheel & handle and die fixing clamps. Suitable size automatic die holder is also supplied with each press. Also available are Cutting, Embossing & Coining Dies.
Heavy Double Sided Embossing Press, Cat No. : JM-020
These are made of extra heavy casting body and supplied with heavy wheel and handle. The main screw of these presses runs inside special PHOSPHOR BRONZE GUN METAL bushing for smooth operation and years of trouble free service. Four Tee Slots from corners to center of the base are provided and two pieces die fixing clamps with oil cup & wrench are supplied. The presses are available in size nos. 4, 6, 8, 10 and 12.
ROUND CHAIN MAKING MACHINE, Cat No. :
This is Round Chain making machine supplied complee with all standard tooling and accessories complete with suitable electricals.This machine is use to make various chains such as 1. R B Chain 2.Taso 3.Bombato 4.Boomar
UNIVERSAL TWO HEAD FACETING MACHINE, Cat No. : JM-02
This is an extremely versatile yet simple to operate machineallowing working with horizontal and vertical head on the samearticle without having to recenter the machine. With the help ofsimple lever, the vertical head can be brought over the work piece without changing the overall center of the machine. This machine is extremely efficient for higher production.
Standard accessories supplied with the machine: a. Two pieces 1/6 HP single phase motors with control panel. b. 17 pcs NYLON collets for the bangles & 17 pcs collets for rings.. c. Flat pendant cutting attachment. d. Pipe chain attachment and Ball para attachment. e. Hand operated brake for the horizontal head. f. 2pcs Diamond Tools and 2 pcs Carbide Tools. Extra accessories available include special lining attach, chain cutting attachment, six tool holder & microscope.
V CHAIN MAKING MACHINE, Cat No. : JM-027
We manufacture and export a fine range of high performance machinery used in the production of high quality Fox (V) chains. With great efficiency and high speeds, our machines ensure great finishes and construction.Technical Specification : Machine suitable to produce fox tail chain from 4 gm upto 50 gm provision for wire softening furnace. Production.
VACUUM CASTING MACHINE, Cat No. : JM-024
This is a standard metal melting, investment mixing and vaccum casting machine. The machine is provided with Dual chamber for vaccum casting with twin dial gauge for excellent casting result. It is fitted with programmable digital controller for metal melting and is supplied complete with a 1.0 HP 220 volt single phase AC electric motor with vaccum pump. Standard accessories include Acrylic Bell jar, rubber sheet, crucible holder, 3 pcs crucibles, 3 pcs stainless steel adapter for different size, 25 pcs silicon rubber rings, 5 pcs various size S.S. perforated flasks, 5 pcs rubber base for free, electric wax welder etc.
VULCANISER, Cat No. : JM-022
This is a heavy duty sturdy vulcanizer equipped with digital temperature controller with thumb wheel switches for precise temperature control and for repeated consistent quality. It is provided with four brass cartridge heaters inserted in two pcs of solid Aluminium heating plates each of one inch thickness for uniform heating. It is suitable for operation on 220 volts single phase supply and is supplied with a sixty minute electo-mechanical timer.
WAX INJECTOR, Cat No. : JM-023
This is an excellent wax injector with solid state digital temperature controller, which allows setting of precise wax melting temperature. It is equipped with double nozzle with airtight partition tank for each individual nozzle. This allows both the nozzles to work independently at different air pressure. So it makes this one injector as good as two different injectors working with common heater to save power. This wax injector is supplied with two separate air pressure meters with safety valve.