Product Categories
  • Agricultural Machines
  • Asian Wire Machines
  • Braille Appliances
  • Construction Machines
  • Dairy Machines
  • Educational Material Charts & Models
  • Food Processing Machines
  • Garage Equipments
  • Jwellery Making Machines
  • Kitchen Equipments
  • Laboratory Equipments
  • Musical Instruments
  • Paper Converting Machines
  • Physiotherapy Instruments
  • Pouch Packing Machines
  • Rice Mill Machinery
  • Scientific & Educational Equipments
  • Sheet Metal Machinery
  • Small Scale Machines
  • Workshop Machines

WORKSHOP MACHINES

  • 4 AXIS CNC PLANO MILLER, Cat No. : WM-017

    WORKSHOP MACHINESA four axis CNC Plano Miller, basically a vertical Ram Head Type Plano Miller. This machine is fitted with a Spanish make Fagor CNC Control, Fagor electronic hand wheel, spindle invertor, spindle encoder, and US make valve balls screw. Spindle taper is ISO-50 or ISO-40 as per design requirement. X,Y, Z,W axis movements are through AC servo motors.

    The machine is designed to take up the maximum load and made of cast iron with flat guide ways, protected with telescope type metallic cover.
    With the combination of main spindle and side attachments, five faces of a component can be machined in one set-up. Various operations like Milling, Drilling, Boring and Tapping can be performed in this versatile machine.
    AUTOMATIC TOOL CHANGER OPTIONAL.
    • Length of stroke (in mm) 1200 1800 2400 3000 3600
    • Width between columns 1000 1200 1350 1500 1800
    • . TABLE
    • Working Length As per stroke length ordered
    • No. of T-Slots 5 5 5 6 6
    • Width of T-Slots (in mm) 19 19 19 19 19
    • . MILLING HEADS
    • No. of Milling Heads One to four as per order
    • Horizontal Traverse (in mm) 900 1100 1250 1400 1700
    • Swivel of Milling Head to either side (in degrees) 60 60 60 60 60
    • . CROSS RAIL
    • Vertical Traverse 750 950 1150 1350 1550
    • . TABLE SPEEDS
    • Variable from 30 mm to 500 mm per minute
    • . MILLING HEADS GENERAL HEAVY DUTY EXTRA HEAVY DUTY
    • Range of Speeds RPM 30 to 400 30 to 300 As per order
    • Motor Variable Speed S-V 3 HP x 3 Phase 5 HP x 3 Phase -do-
    • Spindle nose Dia. MM 85 125 -do-
    • Quil Movement MM 70 100 -do-
    • Micro Feed Manual 0.1 MM 0.1 MM -do-
    • Cutter Dia. MM 100 MM 150 MM -do-
    • Spindle Nose Taper 150 / 40 150 / 50 -do-
    • Extra Heavy Duty Milling Head with 7.5 / 20 HP on order
  • ASIAN SLOTTING MACHINE, Cat No. : WM-042

    WORKSHOP MACHINESStroke : 10mm to 250 mm
    Longitudinal Movement : 230 mm
    Cross Movement : 230 mm
    Speed Adjustment : 3 speed
    Ram Adjustment : 250 mm
    Electric Motor : 1-5 H.P.

  • CNC SPRING COILING MACHINE, Cat No. : WM-002

    WORKSHOP MACHINESCNC 2 Axes Spring Coiling Machines.
    CNC 4 Axes Spring Coiling Machines.
    CNC 4 Axes and 8 Axes Spring Former.
    Mechanical Spring Coiling Machines
    Torsion Spring Coiling Machines.
    Spring end Grinders.
    Heat Treatment Oven.

    • Servo Motors, computer controlled.
    • Synchronized programming for high speed spring productions.
    • Continuous rotation mode insure high-speed production capability.
    • Continuous mode and discontinuous mode programming are selectable.
    • A Micro Pulse Hand Wheel is used to run every motor either in manual Mode or Auto Mode for very easy setup and programming.
    • Easy to read color TFT-LCD screen.
    • Right hand and left hand coiling.
    • Standard security sensor and position sensor included.
    • Servo Motors, computer controlled.
    • Synchronized programming for high speed spring productions.
    • Continuous rotation mode insure high-speed production capability.
    • Continuous mode and discontinuous mode programming are selectable.
    • A Micro Pulse Hand Wheel is used to run every motor either in manual Mode or Auto Mode for very easy setup and programming.
    • Easy to read color TFT-LCD screen.
    • Right hand and left hand coiling.
    • Standard security sensor and position sensor included.
    • Pharmaceutical and Bulk Drug Industry
    • Food Industry
    • Packaging Industry
    • Granules and Flakes Manufacturing Industry
  • DRILL BIT & TOOL BIT GRINDER, Cat No. : WM-041

    WORKSHOP MACHINESDrill Bit & Tool Bit Grinder is a Two in One Machine. The Machine has a 0.37 KW, (1/2 H.P.), 3 Phase, 2800 RPM Motor having 150 mm dia, AA 46 / 54 R.O.S. grinding wheels on both sides for grinding drills from 3mm to 19mm of all types including Taper Shank & long Series Drills also. On the other side a specially designed attachment is fitted with a degree Protector Scale of center 0 to 60 on right and left sides, which gives the correct degree to be grind on HSS Square Tool Bits from 5 mm to 10 mm size for perfect degree grinding of threading Tool Bits accurately to any required angle. The Machine is very simple to Operate. Weight of Machine is 20 kg. Floor Area Required 500 mm x 275 mm x 110 mm.

  • HEAVY DUTY PLANO MILLER, Cat No. : WM-018

    WORKSHOP MACHINESFOR BETTER ACCURACY, FINISH AND PRODUCTIVITY, AVALIABLE IN THREE MODLES
    (a) PLANO MILLER GEAR TYPE
    (b) PLANO MILLER BELT TYPE
    (c) PLANO MILLER ELECTRO MAGNETIC DRIVE TYPE

    • L in the Model indicates any length of stroke required between 6' to 40'
    • Width between columns L 3ft. L 4ft. L 4.5ft. L 5ft. L 5.5ft. L 6ft. L 7ft.
    • Length of Stroke in feet 6 ft. to 40 ft. as per order / requirement
    • Length of Stroke in Meters 1.8m to 12m as per order / requirement
    • . CAPACITY
    • Width between colums 900 1220 1372 1524 1676 1828 2133
    • Height under Cross Rail 900 2300 1372 1524 1676 1828 2133
    • . TABLE
    • Working Surface Length EQUAL TO LENGTH OF STROKE L
    • No. of T-Slots 5 5 5 6 6 6 7
    • Width of T-Slots 19 19 19 19 19 19 19
    • Distance between T-Slots 127 127 148 148 148 190 190
    • . MILLING HEADS
    • No. of Milling Heads ONE, TWO OR THREE AS PER ORDER
    • Horizontal Traverse of Milling Head on Cross Rail 760 900 950 1200 1350 1500 1760
    • Max. swivel of Milling Head to either side 50 60 60 60 60 60 60
    • . CROSS RAIL
    • Vertical Traverse of Cross rail mm (elevating) 750 1200 1330 1500 1650 1800 2060
    • Elevating Traverse of side Milling Head 600 850 100 1150 1300 1400 1750
    • . MILLING HEADS GENERAL DUTY OR HEAVY DUTY as per order No. of speeds 6 6
    • Range of speeds in RPM 55,80,100,130,170,260 50 to 270 rpm
    • Motor 3 phase 440 volts 3 HP/1440 RPM 5 HP/1440 RPM
    • Spindle dia at Nose 85mm 125mm
    • Vertical traverse of quill 70mm 100MM
    • Vertical Traverse operation Hand operated Hand operated
    • Micro Feed Hand operated 1 small division = 0.1 mm One
    • small Division = 0.1mm
    • Feed of Trolly for Milling 32mm to 100mm per minute 32mm to 100mm per minute
    • Cutter Dia 80mm to 10mm 120mm to 150mm
    • Spindle Nose Taper ISO-40 ISO-50
    • Holding of cutter By Draw Bolt Either by draw bolt / bar or bolts on spindle nose
    • Extra heavy duty milling head with 7.5 / 10 HP also available on request
  • Heavy Duty Pneumatic Clutch Power Press, Cat No. : WM-013

    WORKSHOP MACHINESHeavy Duty Pneumatic Clutch Power Press

  • HIGH SPEED SCREW HEAD SLOTTING MACHINE, Cat No. : WM-020

    WORKSHOP MACHINESTHIS ASIAN AUTOMATIC SCREW HEAD SLOTTING MACHINE MAKES SLOTS IN WOODEN SCREW HEADS, SIMPLE IN OPERATION AND GIVES TROUBLE FREE SERVICE, THE SLOTS ARE TRUE, CLEAN, DEEP AND CURVED AT THE BOTTOM.

    • Size No. Length of Blank Wire Size S.W.G Production
    • P.M Motor H.P & R.P.M
    • APC-SL1 1/4"-1"& 1.1/2" 9-14 200-225 1X1440
    • APC-SL2 1/2"-2" 5-12 175-200 1X1440
    • APC-SL3 1"-3&4 0-8 110-135 2X1440
    • APC-SL4 2"-6" 3/0-5 60-100 3X1440
  • HYDRAULIC HACKSAW, Cat No. : WM-016

    WORKSHOP MACHINESV Belt with two speeds by Step Pulleys
    Hydraulic relief to Saw Blade on non cutting strokes.
    Automatic lifting of saw blade after cutting action completes.
    Model: APC-8 APC-10 APC-12 APC-16 APC-20 APC-24
    Capacity - round bar up to (mm): 200 250 300 400 500 600
    Capacity - square bar up to (mm): 150 200 250 325 400 500
    Stroke (mm): 140 140 140 140 150 150
    Strokes per minute: 100 & 120 85 & 100 85 & 100 85 & 100 60 & 85 60 & 85
    Motor (HP): 1.0 1.5 2.0 3.0 5.0 5.0

  • INCLINABLE POWER PRESS, Cat No. : WM-011

    WORKSHOP MACHINESINCLINABLE POWER PRESS

  • LATHE MACHINE, Cat No. : WM-32

    WORKSHOP MACHINESConventional light duty & heavy duty lathes available from ABC 725mm with a center height 165mm in the light duty to large size lathes with center heights of 609mm and admit between center 4000mm with spindle bores 54mm to 156mm.

    Description
    Graded casting
    Flame hardened bed ways
    Available in bush bearing and taper roller bearing
    Available with V belt drive and flat belt drive
    Gap bed is provided
    Norton gear box can be provided for quick thread cutting purposes
    Taper turning and a host of other optional accessories can be provided.

  • NON INCLINABLE POWER PRESS, Cat No. : WM-012

    WORKSHOP MACHINESNON INCLINABLE POWER PRESS

  • Over Crank Mechanical Guillotine Shearing Machine, Cat No. : WM-014

    WORKSHOP MACHINESOver Crank Mechanical Guillotine Shearing Machine

  • PIPE THREADING MACHINE, Cat No. : WM-34

    WORKSHOP MACHINESPIPE THREADING MACHINE

    • Threading capacity 1/2" to 11/2" 1/2" to 21/2"
    • 1" to 4"
    • 21/2" to 6"
    • Movement of Saddle 5" 7"
    • 10"
    • 10"
    • No. of speeds 2 3
    • 3
    • 2
    • Spindle RPM 90 & 120 60, 90 & 120
    • 40, 75 & 115
    • 27 & 50
    • Power Recommended 3 HP 7.5 HP
    • 10 HP
    • 15 HP
    • Tap Setting Range: 1 – 9999 Taps
    • Tap Cylinder Drive: Stepper Motor Driven
    • Display: 20 × 4 Lines, Wide Angle, Alphanumeric Backlit LCD
    • Key Board: 4 × 4 Matrix Feather Touch Key Board
    • Parallel Port Printer Interface for Dot Matrix Printer
    • Compliant with USP Specifications
    • Power Supply: 230 ±10 V AC, 50/60 Hz, 2 Amps Max.
    • Dimensions (cm): 36 × 26 × 36
    • Weight: Nett — 17 Kg. Gross — 25 kg (Approx.)
    • Pharmaceutical and Bulk Drug Industry
    • Food Industry
    • Packaging Industry
    • Granules and Flakes Manufacturing Industry
    -->
  • POWER PRESS, Cat No. : WM-003

    WORKSHOP MACHINESModel: APC-PP5
    Capacity: 5 Tons
    Motor: 2 HP
    Net / Gross Weight (Kgs.): 350 / 450
    Shipping Volume (m3): 1.2
    Power press is equipped with motor, starter and die set for cutting washers

  • RADIAL DRILLING MACHINE, Cat No. : WM-31

    WORKSHOP MACHINESAvailable from 19mm capacity to 38mm bench, pillar, radial drill, belt driven and geared head.
    rition
    Graded casting machine body
    Accurate spindles
    Heavy duty base
    Precision ground pillar
    Can be supplied with a host of allied accessories

  • ROLL FORMING MACHINE FOR MAKING SHUTTER STRIPS, Cat No. : WM-010

    WORKSHOP MACHINESModel: APC SP45 APC SP60
    Capacity - Width of Strip: 4.5" / 115 mm 6.0" / 152 mm
    Capacity - Max. thickness of sheet (mm): 1.2 1.2
    Capacity - Min. thickness of sheet (mm): 0.9 0.9
    Capacity - Max. length: no limit no limit
    Size of formed rolling strip (round type): 3" / 76 mm 3.75" / 95 mm
    Number of Rolls: 6 pairs 6 pairs
    Machine Speed (Feet / Hour) 500 500
    Motor (HP): 3 3
    Net / Gross Weight (kgs.): 1000 / 1350 1000 / 1350
    Dimensions (m): 2.3 x 1.3 x 1.4 2.3 x 1.3 x 1.4
    Shipping Volume (m3): 4.2 4.2

  • SHAPING MACHINE, Cat No. : WM-008

    WORKSHOP MACHINESMODEL: APC -S1 APC-S2 APC-S3
    Length of stroke (mm): 457 610 762
    Length of ram without tool slide (mm): 1016 1270 1524
    Ram bearing in column (mm): 686 826 902
    Ram bearing in width (mm): 241 298 305
    Tool slide traverse (mm): 102 152 152
    Length of cross slide (mm): 749 895 1016
    Width of cross slide (mm): 248 298 298
    Horizontal traverse of the table (mm): 457 559 660
    Vertical traverse of the table (mm): 279 318 330

  • SIMPLE DRILL MACHINE, Cat No. : WM-30

    WORKSHOP MACHINESAvailable from 19mm capacity to 38mm bench, pillar, radial drill, belt driven and geared head.
    rition
    Graded casting machine body
    Accurate spindles
    Heavy duty base
    Precision ground pillar
    Can be supplied with a host of allied accessories

  • SPOT WELDING MACHINE, Cat No. : WM-050

    WORKSHOP MACHINESSpot Welder
    Spot welding machines have special type of transformer with high weld abilities for thick material at low speed using short length arms. The unit has robust construction in heavily reinforced welded steel construction. It combines a compact streamlined appearance with maximum resistance to mechanical deflection. The transformer is enclosed in the main frame and is easily accessible for inspection and maintenance.

    • Welding Transformer: Manufactured from high grade materials of electrolytic copper strips and sections,water cooled with class "F" insulation with standing continuous temperature rise of 140?C.
    • The coils are impregnated and tropicalized.
    • Current Control: By tap link method with 8 tap adjustments on primary of the main transformer having current control from 50% to 100% in 8 steps.
    • Cooling Systems: Electrodes, Electrode holders, Arms, Transformers are all water cooled with one single water cooling circuit.
    • Electrode Control System: Upper electrode is actuated by foot lever or by Air cylinder.
    • The electrode force can easily be calculated in both systems. Air system is provided with gauge and manual system with calibrated spring.
    • All air accessories such as filter, lubricator, regulator, gauge, solenoid valve and speed valve are incorporated.
    • Maximum Operating Speed: Machine is mechanically capable of attaining 60 spots per minute.
    • KVA@50% duty cycle: 7.5---20
    • Rated Input Voltage: 230---415 V
    • Transformer Cooling: Water
    • Water Consumption: 5?10 LMP
    • Arms-Diameter: 40---64
    • Main Supply Cable Size Cu/A1: 6/10---16/25
    • Main Disconnection switch/fuse: 25/15---60/55
    • Current Taps: 8 Nos.
    • Weight: 250?310
    • Height: 1020--1400 mm
  • Universal Gear Head Milling Machine, Cat No. : WM-015

    WORKSHOP MACHINESThe machine has six spindles speeds and 3 feeds. The machine have automatic feeding arrangement in longitudinal. Table in both directions. The vertical and cross table movements are hand operated.
    The machine is constructed with Grade 1 Casting. Splindles, Shafts, Arbor, Screws, Gears and Spacers are made from Alloy Steel. Spindle Gear Box is oil bath lubricated.

    • Working Surface : 1050X250m
    • Number of T-Slots : 3
    • Width of T-Slots : 15mm
    • Pitch of T-Slots : 62mm
    • Maximum Distance from Spindle Centre to Underside of Over
    • Support : 125m
    • ELECTRIC MOTOR : 2 H.P. 1440 RPM
    • SIZEOF MACHINE 550X925X1500 MM
    • MOVEMENTS
    • Longitudinal Movement of the Table by Lever/Screw : 600mm
    • Cross Movement of the Table by Screw : 230mm
    • Vertical Movement of the Table by Screw : 450mm
Asian Power Cyclopes © All Rights Reserved.                                                                                                                                    Designed & Developed by: USoft Technologies
Back to Top